IMPORTANT!
• Keep out of the reach of children
• Avoid contact with eyes
• Keep away from heat and sunlight
• Take control water samples at a depth of 40 cm from the waterline.
• It is recommended to replace indicators every 12 months.
Information:
| CHLORINE LEVEL TEST (CL) | (pH) ACID-BASE LEVEL TEST |
| The scale provided by the numbers indicates the total amount of chlorine in the water. For effective water purification, chlorine values should be in the range of 1.0-1.5 | The scale of values provided by the numbers indicates the degree of acidity or alkalinity of the water To obtain comfortable water and the effectiveness of pool chemistry, the acid-base balance should be in the range of 7.2-7.6 |
How to use:
| Instructions for analyzing chlorine level (CL) | Instructions for acid-base level analysis (pH) |
| 1.Remove the lid from the tester and draw a control sample of water from the pool to the mark. 2.Add 5 drops of ORTHOTOLIDINE (OTO) liquid indicator to the appropriate tester container. 3. Close the lid and shake the tester to dissolve and mix the indicators. 4.Compare the resulting color of the control sample with the color scale. Each color has a corresponding digital value. 5.After completing the test, rinse the tester in clean water. | 1. Remove the lid from the tester and draw a control sample of water from the pool to the mark. 2. Add 5 drops of PHENOL RED liquid indicator to the appropriate tester container. 3. Close the lid and shake the tester to dissolve and mix the indicators. 4. Compare the resulting color of the control sample with the color scale. Each color has a corresponding digital value. 5.After completing the test, rinse the tester in clean water. |
Fast delivery
Exchange and refund
Special conditions for installation and wholesale organizations
We are located at Usta Shirin Street, 114, Tashkent
© 2024 Powered by
